Samsung Note 3 (SM-N9005) Android OS 4.4.2 (KitKat) Leaked Rom – N9005XXUENA6

image_thumb.png

Oh Hell Yeah ~ Here we go !

image

BEWARE: CONTAINS BOOTLOADER IF THE BOOTLOADER IS FLASHED YOU WILL BE STUCK ON IT!!

N9005-XXUENA6 Leaked test firmware from Sammobile for Galaxy Note 3 SM-N9005. Download and flash via odin at your own risk.
ONLY FLASH AP, CSC, and CP

Model: SM-N9005
Country: Open Europe
Version: Android 4.4.2
Changelist: 340325
Build date: Thu, 9 Jan 2014 23:09:09 +0000
Product Code: OXX
PDA: N9005XXUENA6
CSC: N9005OXXENA5
MODEM: N9005XXUENA2

Download :
http://www.sammobile.com/2014/01/12/…IhqC48.twitter
Mirror: http://x-mirror.cu.cc/Samsung/Note3/UnofficialFW/ (Allows Seperate Download)
Google Drive Mirror: https://drive.google.com/file/d/0B5s…it?usp=sharing
Torrent Link: http://mattfacts.com/N3KitKat.rar.torrent
Credits to:
@äon
@Frederick1213 @Idol400
@YellowGTO @Chainfire -Root
NEW Roothttps://plus.google.com/113517319477…ts/QbVy3arpymx

NOTE
– This test firmware WILL wipe your data. So, back it up!
– You are doing this at your OWN risk. We are not responsible if you brick your device or your cat eats your phone.
– This test firmware will NOT increase your binary counter NOR void your warranty.
– This test firmware is a pre-release build and not official from Samsung.

INSTRUCTIONS
– Extract (unzip) the firmware file
– Download Odin3 v3.09 (From here or here)
– Extract Odin .ZIP file
– Open Odin3 v3.09
– Restart phone in download mode (Press and hold Home + Power + Volume down buttons)
– Connect phone and wait until you get a blue sign in Odin
– Add AP_N9005XXUENA6_340325_REV03_user_low_ship_MULTI_CERT.tar.md5 to AP
– Add BL_N9005XXUENA6_340325_REV03_user_low_ship_MULTI_CERT.tar.md5 to BL
– Add CP_N9005XXUENA2_REV03_CL1277177.tar.md5 to CP
– Add CSC_OXX_N9005OXXENA5_327209_REV03_user_low_ship_MULTI_CERT.tar.md5 to CSC
– Make sure re-partition is NOT ticked
– Click start button, sit back and wait a few minutes.
– If you encounter any issues with the firmware (Any FC, Bootloop etc)
– Boot into recovery mode (Home+power+vol up)
– Choose to wipe/factory reset. (THIS WILL ERASE ALL OF YOUR DATA INCLUDING YOUR INTERNAL SD CARD!)
– Then choose reboot and you should be good to go!

Screenshots

Screenshot_2013-01-01-01-02-08 Screenshot_2013-01-01-01-02-16 Screenshot_2013-01-01-01-02-24 Screenshot_2013-01-01-01-02-46Screenshot_2013-01-01-01-03-03
Screenshot_2013-01-01-01-03-11 Screenshot_2014-01-12-19-56-25 Screenshot_2014-01-12-19-57-14 Screenshot_2014-01-12-19-57-28 Screenshot_2014-01-12-19-57-59
Screenshot_2014-01-12-20-03-13 Screenshot_2014-01-12-20-03-19

Via XDA and Sammobile

Facebook comments:

comments

4 Comments

Leave a Reply

Your email address will not be published.

Connect with Facebook