HTC HD2 Flash 街 (Crack HSPL and Run Android) 19OCT Update 5

ok ! 好多人問 : How to do it step by step ? see below :

冇時間 Cap 圖, 周圍搵左 d 番黎

Tips :
– For those would like to use “Exceller Multiple Build Loader”, you MUST rename your build folder name before your first run !!
– 如果你想用 “Exceller Multiple Build Loader”, 你必需要於第一次執行那個 Build 前把資料夾改好名稱.

Notice 1:
*** Before follow below steps, if you have any problems, please DON’T do it, I won’t give you a new machine if fail !!
*** 本人僅提供教學不負任何責任,失敗的話責任自負,怕死的話請不要繼續執行!

Notice 2:
Find a Stable computer, never disconnect during any flashing !
找一部穩定的電腦住行以下刷機, 刷機時千萬不要中斷連線 !

Download : http://www.mirrorcreator.com/files/1THDBM2P/AndroidHD2.zip_links

First Step, Crack the HSPL | 第一步,破解 HSPL

1) Please unzip AndroidHD2.zip, you’ll find 2 Folders , HSPL and Leo_CustomRUU
1) 把 AndroidHD2.zip 解壓, 會有 HSPL 及 Leo_CustomRUU

2) Shutdown you HD2, holding “Down” Volume key, turn on, you’ll see following Screen.
2) 關閉你的 HD2, 長按左側音量制 “下”, 開機, 直至看到以下晝面.

1

3) Connect your HD2 with your Computers, and your PC will detect a new device.
3) 接駁你的 HD2 到電腦.電腦會找到一個新的硬體.

4) Run HSPL\HSPL3_PKG.exe (Version 3 included all SPL)
4) 執行 HSPL\HSPL3_PKG.exe (此版本已包括所有 SPL)

5) Follow the instruction as the program told.
5) 跟軟件指示去做.

image

Started Crack HSPL | 開始破解SPL
2

When you see this on your HD2, Cracking HSPL Done | 當你見到以下畫面, 破解 HSPL 完成
3

Step 2 : Flash a Radio Rom | 第二步 : 刷 Radio Rom ( For those like to run Android | 如果你要運行 Android )

1) Again, shutdown you HD2, holding “Down” Volume key, goto boot loader again.
1) 再一次關閉你的 HD2, 長按左側音量制 “下”, 直至進入四色畫面.

2) Connect your HD2 with your Computers.
2) 接駁你的 HD2 到電腦.

3) Run Leo_CustomRUU\CustomRUU.exe
3) 執行 Leo_CustomRUU\CustomRUU.exe

4) Follow the instruction as the program told.
4) 跟軟件指示去做.

*** Never Disconnect during Flashing !! | 刷機時永不斷開連接 !!!!

a

b

After click this button, it’ll show like this | 按下 Next 後, 會出現以下畫面
d1

Your HD2 will show this | 你的 HD2 會出現以下畫面:
d2

After Reboot, it’s Done ! | 重新啟動後, 完成 !

-There’s 2 Option you can do, 1) Flash a New WinMobile Rom 2) Try Android.
-此時, 你可以選擇 : 1) 刷新的 WinMobile Rom 2) 玩 Android.

WinMobile Rom :
http://forum.xda-developers.com/forumdisplay.php?f=534

I’m using Energy Rom |  我在用 Energy Rom.
http://forum.xda-developers.com/showthread.php?t=591784

-Since, this is English Rom, you may find the HTC EZInput here, it supported Chinese Reading/Input :
-這是英文 Rom, 你可到此找到 HTC 原生中文輸入法 (繁體)
HTC 輸入法繁體中文版 WVGA Version 4.1

Android Guide | 運行 Android 教學 :

==========================================================
#### Update 5
– If you like to try NOT only one Android build, step forward to the end in this guide before you run Android.
-如果你不止想試單一個 Android Build, 到本文最後 :
### Update 3 – Wanna try more build at the SD Card? | 一機玩多個 Android Build : Exceller Multiple Build Loader
==========================================================

-For Android, it just run on SD, after it run, WinMobile will totally shutoff.
-當你運行 Andorid 時, 只會於 SD 咭中運行, 同時 WinMobile 將會完全關閉 WinMobile 之下才執行.

-Following step if fail, it won’t affect to WinMobile, but your SD Card only.
-以下步驟, 萬一出現任何問題, 不會影響原生 WinMobile, 但有可能影響你的 SD Card.

-I found FroyoStone Sense – V3.2 <- Which is stable one & I’m using.
-我正在用 FroyoStone Sense – V3.2 <- 這版本非常穩定 !

Step 1
-After download FroyoStone Sense – V3.2 , put that two folders to your SD card root.
-下載 FroyoStone Sense – V3.2 後, 把兩個資料夾解壓到記憶咭根目錄.

Step 2
-Run : <SD Card>\Android\CLRCAD.exe , if you forget to run, no sound,movie playback will got problems
-執行 : <SD Card>\Android\CLRCAD.exe , 如沒有執行, 會出現沒有聲音,播放影片出現問題..

-After run CLRCAD.exe, it won’t show anything, but make sure you had run it
-當執行 CLRCAD.exe , 不會出現任何畫面, 但必需確認已執行.

Step 3
-Run : <SD Card>\Android\haret.exe
-執行 : <SD Card>\Android\haret.exe

出現以下畫面:
cc

-First run will be take around 5 mins to startup, then should be finished within 2 mins.
-第一次執行Android時可能會比較久,有的時候可能長達5分鐘,之後只要兩分鐘以內就可以開機完畢:

Finished !! | 完成 !!
dd

For Updating Android Build (Same Build): | 更新相同 Andorid Build :
Overwrite the system.ext2 and the zImage files, DO NOT overwrite DATA.IMG.
只需把 system.ext2 及 zImage 覆蓋, 不要覆蓋 DATA.IMG

** Leies Recommend reinstall again for each build !
** Leies 建議每一次更新都重新安裝一次 !

### Update 2 – For Battery Issue :
-If you found the battery go fast… try to download cab and install in WinMobile.
-如果你發現電量走得很快, 可試在 WinMobile 中安裝以下 Cab  .

Download : http://leies.g4team.com/files/LeiesBattery.cab

### Update 1 – Sync with PC :
http://www.htc.com/hk-tc/SupportViewNews.aspx?dl_id=982&news_id=776

### Update 3 – Wanna try more build at the SD Card? | 一機玩多個 Android Build ?
Exceller Multiple Build Loader
http://forum.xda-developers.com/showthread.php?t=737001

Install & Setup : | 安裝及設定 :
1) Install EBL2.1a._PlusUbuntu.CAB in WinMobile
1) 安裝 EBL2.1a._PlusUbuntu.CAB

2) Goto SD Card, place your Android build in different folder, edit EACH startup.txt
2) 到 SD Card, 把每一個 Build 分別放於不同位置, 修改 每一個 Build的 startup.txt

3) Use Notepad/Wordpad edit startup.txt
3) 用 Notepad/Wordpad 修改 startup.txt

Find following line : | 找尋以下一句 :
“set cmdline”

eg1 :
Replace : | 取代為 :
set cmdline “rel_path=YourbuildfolderHere”

-For example, I’m using FroyoStone, I rename it as “FroyoStone”, then startup.txt will be come :
-例如我用 FroyoStone Sense 這個 Build, 我把 “Android” 資料夾改做 “FroyoStone”, 那 Startup.txt 就應該入 :

set cmdline “rel_path=FroyoStone”

eg2 :
set cmdline “rel_path=YourbuildfolderHere lpj=638976

-If you find the startup.txt have this : lpj=638976 in set cmdline, then you should :
-有個別 Build 既 Startup.txt 會出現 : lpj=638976, 那你便可用以下方法輸入 :

set cmdline “rel_path=FroyoStone” lpj=638976″

Exceller Multiple Build Loader 會自動執行 CLRCAD.exe 才執行 haret.exe, 因此不用特別再執行 CLRCAD.exe

### Update 4
-When you used lot of build, it’s quite waste time to install all of the programs again and again… goto Market download a program call :  “Titanium Backup”
-當你正在使用多個 Android Build 時, 每一個 Build 每一次都要從 Market 重新安裝很費時吧 ……到 Market 下載 : “Titanium Backup”

-(English) Usage :
Backup :
1) Press Windows Key then choose “Batch”
2) Press “RUN” @ Backup all user apps + system data
3) Then it will start, after finished, the backup will store at SD Card\TitaniumBackup 裡,這樣每個Android Build都可以還原.

Restore :
1) Press Windows Key then choose “Batch”
2) Press “RUN” @ Restore missing apps + all system data
3) If you’re using same build, 還原的話,Press “Run the batch operation” .
4) Once you upgraded/changed a new Build, Press “Deselect all” to cancel all selection.
5) Choose it one by one manually, the grey crossed line means you did install before, if not show now, then choose them if you would like to restore. Those in Green colors, it’s for System Settings, choose them if you would like to restore, got it ? then press “Run the batch operation”
6) It will ask you to install one by one, after restoration, it still linked to Market place, you still can uninstall from Market.
7) Remember Reboot after restore, you’ll see your file now.

-(中文) 使用方法 :

備份:
1) 按Windows鍵後選 “Batch”
2) 按下 Backup all user apps + system data 前的 RUN
3) 等它跑完就會把東西備份在 sdcard\TitaniumBackup 裡,這樣每個Android系統都可以讀的到它,很方便。

還原:
1) 按Windows鍵後選「Batch」
2) 按下 Restore missing apps + all system data 前的 RUN
3) 若您是同一個的系統版本, 還原的話,此時直接按下「Run the batch operation」就可以了。
4) 若是換了新系統的話,請先點一下「Deselect all」取消所有選取。
5) 然後自己一個一個選,灰色有畫刪除線的就是之前有灌,現在沒有的話,看哪些這次想灌的就把它勾起來,綠色字的,就是有儲存系統設定的,想要複原的話也把它勾起來,再按下「Run the batch operation」。
6) 若有安裝軟體的話,程式還是會一個一個問你要不要安裝,而且厲害的是,若是從Market上下載的程式,還原回去後,還是可以在Market看到連結,有新版的也能更新,非常的棒。
7) 最後請重新開機一下,就可以看到原來的東西了,非常方便。

P.S. 聯絡人、行事歷、電子郵件,建議直接同步到Google帳號。

============================================

如有任何問題, 可找我 – Leies FB | @leies

Facebook comments:

comments

2 Comments

Leave a Reply

Your email address will not be published.

Connect with Facebook