Samsung Galaxy Note N7000ZSLA2 Rom + Root + CWM + AbyssNote kernel 3.6

I found some problem while I flashing the latest rom with root & CWM. The main issue for latest rom, we can’t use zergRush method to root. And we must using rootable rom then upgrade from Mobile Odin. But after Mobile Odin, the CWM can’t recognized the kernel which means we can’t flash Kernel .. So that’s why this post release…

You must backup your files before any flashing !!

Let’s Start, first of all , Download all .. need some time.. have a coffee and wait finishing all downloads.

1) Odin for Windows :
http://www.mediafire.com/?66ts4sxx50whmrd

2) N7000ZSKK1 Rom ( Zip Password : samfirmware.com )
http://hotfile.com/dl/135024220/c9cbbcb/N7000ZSKK1_N7000OZSKK1_TGY.rar.html

3) Root KK1 Rom tool
http://www.mediafire.com/?994bmqp9d9lt7wc

4) CWM for KK1 Rom tool
http://www.mediafire.com/?ii6p38fcqe7vmct

5) 官方完整版 N7000ZSLA2 Rom + Rooted+AbyssNotekernel36OriginalLogo
http://www.crocko.com/3E3ABC34C64A43D2A0F6C066206D3B0A/N7000ZSLA2_Custom.zip

 

**** Root/Flash your devices may void your warranty and I take ZERO responsibly for any damage if you encounter.

Step One : Flash back to Official Rom which can get Root.

N7000ZSKK1_N7000OZSKK1_TGY.rar
1) Install Kies on your computer, connect your phone and make sure that all the drivers installed correctly.
2) Extract tar file from the ROM(remember to extract it till tar, dont go deep). Put the phone into download mode (vol. down+home+power buttons),
3) Start odin, then only connect the phone via USB. Choose continue on the phone, Now ID:COM box shud turn yellow (see Image)
Make sure that only two boxes are checked in odin – Auto Reboot and F.Reset Time.(See Image)
– If your downloaded ROM contains single file
4) Choose PDA button in Odin and select tar file you extracted before. (see Image)

– If your downloaded file contains multifiles
5) Choose CODE in PDA, MODEM in PHONE, Multi CSC in CSC(see Image)

6) Choose START button.
The phone will reboot after the flash.

Done !

Step Two : Root and Install CWM

Root : (DooMLoRD_v4_ROOT-zergRush-busybox-su.zip)

1) Check Settings > Applications > Development > USB Debug
2) Check Settings > Applications > Unknown sources
3) Connect USB cable (wait for the drivers are installed automatically)
4) Run runme.bat
5) Reboot automatically

Install CWM : (CF-Root-SGN_ZS_MUL_KK1-v5.0-CWM5.rar)

1) After Root, on PC side, get into InitialCFRootFlasher folder (PC) and run already-rooted.bat
2) Reboot automatically

Finished ! Root with CWM

 

Step Three : Flash LA2 Rom

N7000ZSLA2_Custom.zip

1) You dun have to extract the zip, copy the zip to your phone storage.
2) Click CWM > Reboot to ClockWorkMod
3) install zip from sdcard
4) choose zip from sdcard
5) choose N7000ZSLA2_Custom.zip
6) Yes – Install
7) Wait for finish
8) +++++Go Back+++++
9) Reboot System Now
10) DONE !!!

After reboot, you’ll get a new rooted rom with CWM and Nice Kernel . Have Fun !

 

Great Thanks to :
Mobile01 czh
XDA Forum

Facebook comments:

comments

Leave a Reply

Your email address will not be published.

Connect with Facebook